Departments
Departments > Utilities > Consumer Confidence Report

<< Return

Consumer Confidence Report

The Consumer Confidence Rule requires public water suppliers that serve the same people year round (community water systems) to provide consumer confidence reports (CCR) to their customers. These reports are also known as annual water quality reports or drinking water quality reports. The remaining public water systems in the U.S. are not required to provide CCRs, because they do not serve the same people on a day-to-day basis throughout the year.

The CCR summarizes information regarding sources used (i.e., rivers, lakes, reservoirs, or aquifers) any detected contaminants, compliance and educational information. The reports are due to customers by July 1st of each year.

While water systems are free to enhance their reports in any useful way, each report must provide consumers with the following fundamental information about their drinking water:

  • the lake, river, aquifer, or other source of the drinking water;
  • a brief summary of the susceptibility to contamination of the local drinking water source, based on the source water assessments by states;
  • how to get a copy of the water system's complete source water assessment;
  • the level (or range of levels) of any contaminant found in local drinking water, as well as EPA's health-based standard (maximum contaminant level) for comparison;
  • the likely source of that contaminant in the local drinking water supply;
  • the potential health effects of any contaminant detected in violation of an EPA health standard, and an accounting of the system's actions to restore safe drinking water;
  • the water system's compliance with other drinking water-related rules;
  • an educational statement for vulnerable populations about avoiding Cryptosporidium;
  • educational information on nitrate, arsenic, or lead in areas where these contaminants may be a concern; and
  • phone numbers of additional sources of information, including the water system and EPA's Safe Drinking Water Hotline (800-426-4791).

Click for the CCR Report for your area or scroll down to see all CCR Reports:

Download a copy of the CCR Report for your area here: (must have adobe reader)



CCR Report for WBR Public Utilites Public Water Supply ID: LA1121008 Download Report: WBR Public Utilites Public Water Supply ID: LA1121008

The Water We Drink

WBR Public Utilities

Public Water Supply ID: LA1121008

We are pleased to present to you the Annual Water Quality Report for the year 2016. This report is designed to inform you about the quality of your water and services we deliver to you every day (Este informe contiene información muy importante sobre su agua potable. Tradúzcalo o hable con alguien que lo entienda bien). Our constant goal is to provide you with a safe and dependable supply of drinking water. We want you to understand the efforts we make to continually improve the water treatment process and protect our water resources. We are committed to ensuring the quality of your water.

Our water source(s) are listed below:

Source NameSource Water Type
WBR PUBLIC UTILITIES WELL 4 SUNRISEGround Water
OURSO WELL-HWY 1 NORTHGround Water
WBR PUBLIC UTILITIES HUNTER RUNGround Water
WBR PUBLIC UTILITIES WELL 1 LAFITONGround Water

The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of land or through the ground, it dissolves naturally-occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity. Contaminants that may be present in source water include:

Microbial Contaminants - such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife.

Inorganic Contaminants - such as salts and metals, which can be naturally-occurring or result from urban storm-water runoff, industrial, or domestic wastewater discharges, oil and gas production, mining, or farming.

Pesticides and Herbicides - which may come from a variety of sources such as agriculture, urban storm-water runoff, and residential uses.

Organic Chemical Contaminants – including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban storm-water runoff, and septic systems.

Radioactive Contaminants – which can be naturally-occurring or be the result of oil and gas production and mining activities.

A Source Water Assessment Plan (SWAP) is now available from our office. This plan is an assessment of a delineated area around our listed sources through which contaminants, if present, could migrate and reach our source water. It also includes an inventory of potential sources of contamination within the delineated area, and a determination of the water supply's susceptibility to contamination by the identified potential sources. According to the Source Water Assessment Plan, our water system had a susceptibility rating of 'MEDIUM'. If you would like to review the Source Water Assessment Plan, please feel free to contact our office.

In order to ensure that tap water is safe to drink, EPA prescribes regulations which limit the amount of certain contaminants in water provided by public water systems. Food and Drug Administration regulations establish limits for contaminants in bottled water which must provide the same protection for public health. We want our valued customers to be informed about their water utility. If you have any questions about this report, want to attend any scheduled meetings, or simply want to learn more about your drinking water, please contact DARYL BABIN at 225-336-2406.

If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. WBR PUBLIC UTILITIES is responsible for providing high quality drinking water, but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at http://www.epa.gov/safewater/lead.

The Louisiana Department of Health and Hospitals - Office of Public Health routinely monitors for constituents in your drinking water according to Federal and State laws. The tables that follow show the results of our monitoring during the period of January 1st to December 31st, 2016. Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk.

In the tables below, you will find many terms and abbreviations you might not be familiar with. To help you better understand these terms, we’ve provided the following definitions:

Parts per million (ppm) or Milligrams per liter (mg/L)– one part per million corresponds to one minute in two years or a single penny in $10,000.

Parts per billion (ppb) or Micrograms per liter (ug/L)– one part per billion corresponds to one minute in 2,000 years, or a single penny in $10,000,000.

Picocuries per liter (pCi/L) – picocuries per liter is a measure of the radioactivity in water.

Nephelometric Turbidity Unit (NTU) – nephelometric turbidity unit is a measure of the clarity of water. Turbidity in excess of 5 NTU is just noticeable to the average person.

Action level (AL) – the concentration of a contaminant that, if exceeded, triggers treatment or other requirements that a water system must follow.

Maximum contaminant level (MCL) – the "Maximum Allowed” MCL is the highest level of a contaminant that is allowed in drinking water. MCL’s are set as close to the MCLG’s as feasible using the best available treatment technology.

Maximum contaminant level goal (MCLG) – the "Goal” is the level of a contaminant in drinking water below which there is no known or expected risk to human health. MCLG’s allow for a margin of safety.

Maximum residual disinfectant level (MRDL) – The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

Maximum residual disinfectant level goal (MRDLG) – The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.

During the period covered by this report we had the below noted violations.

Compliance PeriodAnalyteType
1/1/2014 - 12/31/2016LEAD & COPPER RULELEAD CONSUMER NOTICE (LCR)

Our water system tested a minimum of 4 samples per month in accordance with the Total Coliform Rule for microbiological contaminants. During the monitoring period covered by this report, we had the following noted detections for microbiological contaminants:

MicrobiologicalResultMCLMCLGTypical Source
No Detected Results were Found in the Calendar Year of 2016

In the tables below, we have shown the regulated contaminants that were detected. Chemical Sampling of our drinking water may not be required on an annual basis; therefore, information provided in this table refers back to the latest year of chemical sampling results.

Regulated ContaminantsCollection DateHighest ValueRangeUnitMCLMCLGTypical Source
ARSENIC 6/8/201621 - 2ppb100Erosion of natural deposits; Runoff from orchards; Runoff from glass and electronics production wastes
DI(2-ETHYLHEXYL) PHTHALATE5/16/20163.60.64 - 3.6ppb60Discharge from rubber and chemical factories
FLUORIDE5/16/20160.280.2 - 0.28ppm44Erosion of natural deposits; Water additive which promotes strong teeth; Discharge from fertilizer and aluminum factories
HEXACHLOROBEN ZENE4/8/20130.0810.061 - 0.081ppb10Discharge form metal refineries and agricultural chemical factories

RadionuclidesCollection DateHighest ValueRangeUnitMCLMCLGTypical Source
COMBINED RADIUM (-226 & -228)6/8/20160.9340.617 - 0.934pCi/l50Erosion of natural deposits
GROSS ALPHA PARTICLE ACTIVITY5/16/20162.312.31pCi/l150Erosion of natural deposits
GROSS ALPHA, EXCL. RADON & U5/16/20162.312.31pCi/l150Erosion of natural deposits
GROSS BETA PARTICLE ACTIVITY5/16/20161.721.72pCi/l500Decay of natural and man-made deposits. Note: The gross beta particle activity MCL is 4 millirems/year annual dose equivalent to the total body or any internal organ. 50 pCi/L is used as a screening level.

Lead and CopperDate90TH PercentileRangeUnitALSites Over ALTypical Source
COPPER, FREE2014 - 20160.10.1ppm1.30Corrosion of household plumbing systems; Erosion of natural deposits; Leaching from wood preservatives
LEAD2014 - 201611 - 2ppb150Corrosion of household plumbing systems; Erosion of natural deposits


Disinfection ByproductsSample PointPeriodHighest LRAARangeUnitMCLMCLGTypical Source
TOTAL HALOACETIC ACIDS (HAA5)2180 PLANTATION AVENUE201610.85 - 0.85ppb600By-product of drinking water disinfection
TOTAL HALOACETIC ACIDS (HAA5)4142 RIVERVIEW RD201610.73 - 0.73ppb600By-product of drinking water disinfection
TTHM2180 PLANTATION AVENUE201643.7 - 3.7PPB800By-product of drinking water chlorination
TTHM4142 RIVERVIEW RD201644.1 - 4.1ppb800By-product of drinking water chlorination

Secondary ContaminantsCollection DateHighest ValueRangeUnitSMCL
ALUMINUM6/8/20160.030.03MG/L0.05
CHLORIDE5/16/20167.63.7 - 7.6MG/L250
IRON6/8/20160.410.03 - 0.41MG/L0.3
MANGANESE6/8/20160.050.01 - 0.05MG/L0.05
PH5/16/20168.76.09 - 8.7PH8.5
SULFATE6/8/2016128.8 - 12MG/L250


DisinfectantDateHighest RAAUnitRangeMRDLMRDLGTypical Source
CHLORINE20161.32ppm0.63 - 1.9944Water additive used to control microbes

++++++Environmental Protection Agency Required Health Effects Language++++++

Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infections. These people should seek advice about drinking water from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Drinking Water Hotline (800–426–4791).

There are no additional required health effects notices.

There are no additional required health effects violation notices.


Thank you for allowing us to continue providing your family with clean, quality water this year. In order to maintain a safe and dependable water supply we sometimes need to make improvements that will benefit all of our customers.

We at the WBR PUBLIC UTILITIES work around the clock to provide top quality drinking water to every tap. We ask that all our customers help us protect and conserve our water sources, which are the heart of our community, our way of life, and our children's future. Please call our office if you have questions at 225-336-2406.

 



CCR Report for WEST BATON ROUGE WATER WORKS DISTRICT 2 Public Water Supply ID: LA1121018

Download Report: WEST BATON ROUGE WATER WORKS DISTRICT 2 Public Water Supply ID: LA1121018

The Water We Drink

WEST BATON ROUGE WATER WORKS DISTRICT 2

Public Water Supply ID: LA1121018

We are pleased to present to you the Annual Water Quality Report for the year 2016. This report is designed to inform you about the quality of your water and services we deliver to you every day (Este informe contiene información muy importante sobre su agua potable. Tradúzcalo o hable con alguien que lo entienda bien). Our constant goal is to provide you with a safe and dependable supply of drinking water. We want you to understand the efforts we make to continually improve the water treatment process and protect our water resources. We are committed to ensuring the quality of your water.

Our water source(s) are listed below:

Source NameSource Water Type
WBR WWKS DIST #2 NORTHLINE ROAD WELLGround Water
WBR WWKS DIST #2 WESTGATE WELLGround Water

The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of land or through the ground, it dissolves naturally-occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity. Contaminants that may be present in source water include:

Microbial Contaminants - such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife.

Inorganic Contaminants - such as salts and metals, which can be naturally-occurring or result from urban stormwater runoff, industrial, or domestic wastewater discharges, oil and gas production, mining, or farming.

Pesticides and Herbicides - which may come from a variety of sources such as agriculture, urban stormwater runoff, and residential uses.

Organic Chemical Contaminants – including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban stormwater runoff, and septic systems.

Radioactive Contaminants – which can be naturally-occurring or be the result of oil and gas production and mining activities.

A Source Water Assessment Plan (SWAP) is now available from our office. This plan is an assessment of a delineated area around our listed sources through which contaminants, if present, could migrate and reach our source water. It also includes an inventory of potential sources of contamination within the delineated area, and a determination of the water supply's susceptibility to contamination by the identified potential sources. According to the Source Water Assessment Plan, our water system had a susceptibility rating of 'MEDIUM'. If you would like to review the Source Water Assessment Plan, please feel free to contact our office.

In order to ensure that tap water is safe to drink, EPA prescribes regulations which limit the amount of certain contaminants in water provided by public water systems. Food and Drug Administration regulations establish limits for contaminants in bottled water which must provide the same protection for public health. We want our valued customers to be informed about their water utility. If you have any questions about this report, want to attend any scheduled meetings, or simply want to learn more about your drinking water, please contact DARYL BABIN at 225-336-2406.

If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. WEST BATON ROUGE WATER WORKS DISTRICT 2 is responsible for providing high quality drinking water, but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at http://www.epa.gov/safewater/lead.

The Louisiana Department of Health and Hospitals - Office of Public Health routinely monitors for constituents in your drinking water according to Federal and State laws. The tables that follow show the results of our monitoring during the period of January 1st to December 31st, 2016. Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk.

In the tables below, you will find many terms and abbreviations you might not be familiar with. To help you better understand these terms, we’ve provided the following definitions:

Parts per million (ppm) or Milligrams per liter (mg/L) – one part per million corresponds to one minute in two years or a single penny in $10,000.

Parts per billion (ppb) or Micrograms per liter (ug/L) – one part per billion corresponds to one minute in 2,000 years, or a single penny in $10,000,000.

Picocuries per liter (pCi/L) – picocuries per liter is a measure of the radioactivity in water.

Nephelometric Turbidity Unit (NTU) – nephelometric turbidity unit is a measure of the clarity of water. Turbidity in excess of 5 NTU is just noticeable to the average person.

Action level (AL)– the concentration of a contaminant that, if exceeded, triggers treatment or other requirements that a water system must follow.

Maximum contaminant level (MCL) – the "Maximum Allowed” MCL is the highest level of a contaminant that is allowed in drinking water. MCL’s are set as close to the MCLG’s as feasible using the best available treatment technology.

Maximum contaminant level goal (MCLG) – the "Goal” is the level of a contaminant in drinking water below which there is no known or expected risk to human health. MCLG’s allow for a margin of safety.

Maximum residual disinfectant level (MRDL) – The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

Maximum residual disinfectant level goal (MRDLG) – The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.

During the period covered by this report we had the below noted violations.

Compliance PeriodAnalyteType
No Violations Occurred in the Calendar Year of 2016

Our water system tested a minimum of 15 samples per month in accordance with the Total Coliform Rule for microbiological contaminants. During the monitoring period covered by this report, we had the following noted detections for microbiological contaminants:

MicrobiologicalResultMCLMCLGTypical Source
Coliform (TCR)In the month of September, 1 sample(s) returned as positiveMCL: Systems that Collect Less Than 40 Samples per Month - No more than 1 positive monthly sample0Naturally present in the environment

In the tables below, we have shown the regulated contaminants that were detected. Chemical Sampling of our drinking water may not be required on an annual basis; therefore, information provided in this table refers back to the latest year of chemical sampling results.

Regulated ContaminantsCollection DateHighest ValueRangeUnitMCLMCLGTypical Source
FLUORIDE7/26/20160.20.2PPM44Erosion of natural deposits; Water additive which promotes strong teeth; Discharge from fertilizer and aluminum factories

RadionuclidesCollection DateHighest ValueRangeUnitMCLMCLGTypical Source
No Detected Results were Found in the Calendar Year of 2016

Lead and CopperDate90TH PercentileRangeUnitALSites Over ALTypical Source
COPPER, FREE2012-2014 0.1 0.1 ppm 1.30 Corrosion of household plumbing systems; Erosion of natural deposits; Leaching from wood preservatives
LEAD 2012-20143 1-6ppb 150Corrosion of household plumbing systems; Erosion of natural deposits

Disinfection ByproductsSample PointPeriodHighest LRAARangeUnitMCLMCLGTypical Source
TOTAL HALOACETIC ACIDS (HAA5)BIRD HEIGHTS201688.2 - 8.2PPB600By-product of drinking water disinfection
TOTAL HALOACETIC ACIDS (HAA5)ELLWOOD ROAD201688.1-8.1
PPB600By-product of drinking water disinfection
TTHMBIRD HEIGHTS20163030.2 - 30.2PPB800By-product of drinking water chlorination
TTHMELLWOOD ROAD20163535.1 - 35.1PPB800By-product of drinking water chlorination

Secondary ContaminantsCollection DateHighest ValueRangeUnitSMCL
ALUMINUM7/26/20160.010.01MG/L0.05
CHLORIDE7/26/2016221.4221.4MG/L250
IRON7/26/20160.010.01MG/L0.05
MANGANESE7/26/20160.040.04MG/L0.05
PH7/26/20168.148.14PH8.5
SULFATE7/26/20161616MG/L250



DisinfectantDateHighest RAAUnitRangeMRDLMRDLGTypical Source
CHLORINE20161.38ppm0.61 - 2.1644Water additive used to control microbes

++++++++++++Environmental Protection Agency Required Health Effects Language++++++++++++

Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infections. These people should seek advice about drinking water from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Drinking Water Hotline (800–426–4791).

Additional Required Health Effects Language:
Coliforms are bacteria that are naturally present in the environment and are used as an indicator that other, potentially-harmful, bacteria may be present. Coliforms were found in more samples than allowed and this was a warning of potential problems.

There are no additional required health effects violation notices.


Thank you for allowing us to continue providing your family with clean, quality water this year. In order to maintain a safe and dependable water supply we sometimes need to make improvements that will benefit all of our customers.

We at the WEST BATON ROUGE WATER WORKS DISTRICT 2 work around the clock to provide top quality drinking water to every tap. We ask that all our customers help us protect and conserve our water sources, which are the heart of our community, our way of life, and our children's future. Please call our office at 225-336-2406 if you have questions.



CCR Report for WBR District 4 Arbroth Public Water Supply ID: LA1121026

Download Report: WBR District 4 Arbroth Public Water Supply ID: LA1121026

The Water We Drink

WBR District 4 - Arbroth

Public Water Supply ID: LA1121026

We are pleased to present to you the Annual Water Quality Report for the year 2016. This report is designed to inform you about the quality of your water and services we deliver to you every day (Este informe contiene información muy importante sobre su agua potable. Tradúzcalo o hable con alguien que lo entienda bien). Our constant goal is to provide you with a safe and dependable supply of drinking water. We want you to understand the efforts we make to continually improve the water treatment process and protect our water resources. We are committed to ensuring the quality of your water.

Our water source(s) are listed below:

Source NameSource Water Type
WBR DIST #4 ARBROTH WELLGround Water

The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of land or through the ground, it dissolves naturally-occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity. Contaminants that may be present in source water include:

Microbial Contaminants - such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife.

Inorganic Contaminants - such as salts and metals, which can be naturally-occurring or result from urban stormwater runoff, industrial, or domestic wastewater discharges, oil and gas production, mining, or farming.

Pesticides and Herbicides - which may come from a variety of sources such as agriculture, urban stormwater runoff, and residential uses.

Organic Chemical Contaminants – including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban stormwater runoff, and septic systems.

Radioactive Contaminants – which can be naturally-occurring or be the result of oil and gas production and mining activities.

A Source Water Assessment Plan (SWAP) is now available from our office. This plan is an assessment of a delineated area around our listed sources through which contaminants, if present, could migrate and reach our source water. It also includes an inventory of potential sources of contamination within the delineated area, and a determination of the water supply's susceptibility to contamination by the identified potential sources. According to the Source Water Assessment Plan, our water system had a susceptibility rating of 'LOW'. If you would like to review the Source Water Assessment Plan, please feel free to contact our office.

In order to ensure that tap water is safe to drink, EPA prescribes regulations which limit the amount of certain contaminants in water provided by public water systems. Food and Drug Administration regulations establish limits for contaminants in bottled water which must provide the same protection for public health. We want our valued customers to be informed about their water utility. If you have any questions about this report, want to attend any scheduled meetings, or simply want to learn more about your drinking water, please contact DARYL BABIN at 225-336-2406.

If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. WBR DISTRICT 4 - ARBROTH is responsible for providing high quality drinking water, but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at http://www.epa.gov/safewater/lead.

The Louisiana Department of Health and Hospitals - Office of Public Health routinely monitors for constituents in your drinking water according to Federal and State laws. The tables that follow show the results of our monitoring during the period of January 1st to December 31st, 2016. Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk.

In the tables below, you will find many terms and abbreviations you might not be familiar with. To help you better understand these terms, we’ve provided the following definitions:

Parts per million (ppm) or Milligrams per liter (mg/L)– one part per million corresponds to one minute in two years or a single penny in $10,000.

Parts per billion (ppb) or Micrograms per liter (ug/L)– one part per billion corresponds to one minute in 2,000 years, or a single penny in $10,000,000.

Picocuries per liter (pCi/L) – picocuries per liter is a measure of the radioactivity in water.

Nephelometric Turbidity Unit (NTU) – nephelometric turbidity unit is a measure of the clarity of water. Turbidity in excess of 5 NTU is just noticeable to the average person.

Action level (AL) – the concentration of a contaminant that, if exceeded, triggers treatment or other requirements that a water system must follow.

Maximum contaminant level (MCL) – the "Maximum Allowed” MCL is the highest level of a contaminant that is allowed in drinking water. MCL’s are set as close to the MCLG’s as feasible using the best available treatment technology.

Maximum contaminant level goal (MCLG) – the "Goal” is the level of a contaminant in drinking water below which there is no known or expected risk to human health. MCLG’s allow for a margin of safety.

Maximum residual disinfectant level (MRDL) – The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

Maximum residual disinfectant level goal (MRDLG) – The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.

During the period covered by this report we had the below noted violations.

Compliance PeriodAnalyteType
No Violations Occurred in the Calendar Year of 2016

Our water system tested a minimum of 1 samples per month in accordance with the Total Coliform Rule for microbiological contaminants. During the monitoring period covered by this report, we had the following noted detections for microbiological contaminants:

MicrobiologicalResultMCLMCLGTypical Source
No Detected Results were Found in the Calendar Year of 2016

In the tables below, we have shown the regulated contaminants that were detected. Chemical Sampling of our drinking water may not be required on an annual basis; therefore, information provided in this table refers back to the latest year of chemical sampling results.

Regulated ContaminantsCollection DateHighest ValueRangeUnitMCLMCLGTypical Source
FLUORIDE5/16/20160.260.2 - 0.26ppm44Erosion of natural deposits; Water additive which promotes strong teeth; Discharge from fertilizer and aluminum factories

RadionuclidesCollection DateHighest ValueRangeUnitMCLMCLGTypical Source
COMBINED RADIUM (-226 & -228)5/16/20161.291.29pCi/l50Erosion of natural deposits

Lead and CopperDate90TH PercentileRangeUnitALSites Over ALTypical Source
COPPER, FREE2013 – 20150.10.1PPM1.30Corrosion of household plumbing systems; Erosion of natural deposits; Leaching from wood preservatives
LEAD2013 – 201561 - 8PPB150Corrosion of household plumbing systems; Erosion of natural deposits

Disinfection ByproductsSample PointPeriodHighest LRAARangeUnitMCLMCLGTypical Source
TOTAL HALOACETIC (HAA5) ACIDS10240 BUECHE ROAD201621.9 - 1.9ppb600By-product of drinking water disinfection
TOTAL HALOACETIC (HAA5) ACIDS18525 N RIVER ROAD201643.8 - 3.8ppb600By-product of drinking water disinfection
TTHM10240 BUECHE ROAD20161111 - 11ppb800By-product of drinking water chlorination
TTHM18525 N RIVER ROAD20161918.5 - 18.5ppb800By-product of drinking water chlorination

Secondary ContaminantsCollection DateHighest ValueRangeUnitSMCL
ALUMINUM5/16/20160.010.01MG/L0.05
CHLORIDE5/16/20163.43.4MG/L250
IRON5/16/20160.010.01MG/L0.3
MANGANESE5/16/20160.010.01MG/L0.5
PH5/16/20169.18.74 - 9.1PH8.5
SULFATE5/16/201698.7 - 9.1MG/L250


DisinfectantDateHighest RAAUnitRangeMRDLMRDLGTypical Source
CHLORINE20161.41ppm0.65 - 1.9444Water additive used to control microbes


 

++++++Environmental Protection Agency Required Health Effects Language++++++

Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infections. These people should seek advice about drinking water from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Drinking Water Hotline (800–426–4791).

There are no additional required health effects notices.

There are no additional required health effects violation notices.


Thank you for allowing us to continue providing your family with clean, quality water this year. In order to maintain a safe and dependable water supply we sometimes need to make improvements that will benefit all of our customers.

We at the WBR DISTRICT 4 - ARBROTH work around the clock to provide top quality drinking water to every tap. We ask that all our customers help us protect and conserve our water sources, which are the heart of our community, our way of life, and our children's future. Please call our office at (225) 336-2406 if you have questions.



CCR Report for WBR District 4 Holiday Inn Public Water Supply ID: LA1121024

Download Report: CCR Report for WBR District 4 Holiday Inn Public Water Supply ID: LA1121024

The Water We Drink

WBR District 4 Holiday Inn

Public Water Supply ID: LA1121024

We are pleased to present to you the Annual Water Quality Report for the year 2016. This report is designed to inform you about the quality of your water and services we deliver to you every day (Este informe contiene información muy importante sobre su agua potable. Tradúzcalo o hable con alguien que lo entienda bien). Our constant goal is to provide you with a safe and dependable supply of drinking water. We want you to understand the efforts we make to continually improve the water treatment process and protect our water resources. We are committed to ensuring the quality of your water.

Our water system purchases water as listed below:

Buyer NameSeller Name
WBR DISTRICT 4 - HOLIDAY INNWBR PUBLIC UTILITIES

The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of land or through the ground, it dissolves naturally-occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity. Contaminants that may be present in source water include:

Microbial Contaminants - such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife.

Inorganic Contaminants - such as salts and metals, which can be naturally-occurring or result from urban stormwater runoff, industrial, or domestic wastewater discharges, oil and gas production, mining, or farming.

Pesticides and Herbicides - which may come from a variety of sources such as agriculture, urban stormwater runoff, and residential uses.

Organic Chemical Contaminants – including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban stormwater runoff, and septic systems.

Radioactive Contaminants – which can be naturally-occurring or be the result of oil and gas production and mining activities.

A Source Water Assessment Plan (SWAP) is now available from our office. This plan is an assessment of a delineated area around our listed sources through which contaminants, if present, could migrate and reach our source water. It also includes an inventory of potential sources of contamination within the delineated area, and a determination of the water supply's susceptibility to contamination by the identified potential sources. According to the Source Water Assessment Plan, our water system had a susceptibility rating of 'MEDIUM'. If you would like to review the Source Water Assessment Plan, please feel free to contact our office.

In order to ensure that tap water is safe to drink, EPA prescribes regulations which limit the amount of certain contaminants in water provided by public water systems. Food and Drug Administration regulations establish limits for contaminants in bottled water which must provide the same protection for public health. We want our valued customers to be informed about their water utility. If you have any questions about this report, want to attend any scheduled meetings, or simply want to learn more about your drinking water, please contact DARYL BABIN at 225-336-2406.

If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. WBR DISTRICT 4 - HOLIDAY INN is responsible for providing high quality drinking water, but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at http://www.epa.gov/safewater/lead.

The Louisiana Department of Health and Hospitals - Office of Public Health routinely monitors for constituents in your drinking water according to Federal and State laws. The tables that follow show the results of our monitoring during the period of January 1st to December 31st, 2016. Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk..

In the tables below, you will find many terms and abbreviations you might not be familiar with. To help you better understand these terms, we’ve provided the following definitions:

Parts per million (ppm) or Milligrams per liter (mg/L)– one part per million corresponds to one minute in two years or a single penny in $10,000.

Parts per billion (ppb) or Micrograms per liter (ug/L)– one part per billion corresponds to one minute in 2,000 years, or a single penny in $10,000,000.

Picocuries per liter (pCi/L) – picocuries per liter is a measure of the radioactivity in water.

Nephelometric Turbidity Unit (NTU) – nephelometric turbidity unit is a measure of the clarity of water. Turbidity in excess of 5 NTU is just noticeable to the average person.

Action level (AL) – the concentration of a contaminant that, if exceeded, triggers treatment or other requirements that a water system must follow.

Maximum contaminant level (MCL) – the "Maximum Allowed” MCL is the highest level of a contaminant that is allowed in drinking water. MCL’s are set as close to the MCLG’s as feasible using the best available treatment technology.

Maximum contaminant level goal (MCLG) – the "Goal” is the level of a contaminant in drinking water below which there is no known or expected risk to human health. MCLG’s allow for a margin of safety.

Maximum residual disinfectant level (MRDL) – The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

Maximum residual disinfectant level goal (MRDLG) – The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.

During the period covered by this report we had below noted violations of drinking water regulations.

Compliance PeriodAnalyteType
No Violations Occurred in the Calendar Year of 2016

Our water system tested a minimum of 2 samples per month in accordance with the Total Coliform Rule for microbiological contaminants. During the monitoring period covered by this report, we had the following noted detections for microbiological contaminants:

MicrobiologicalResultMCLMCLGTypical Source
No Detected Results were Found in the Calendar Year of 2016

In the tables below, we have shown the regulated contaminants that were detected. Chemical Sampling of our drinking water may not be required on an annual basis; therefore, information provided in this table refers back to the latest year of chemical sampling results.

Regulated ContaminantsCollection DateWater SystemHighest ValueRangeUnitMCLMCLGTypical Source
ARSENIC6/8/2016WBR PUBLIC UTILITIES21 - 2ppb100Erosion of natural deposits; Runoff from orchards; Runoff from glass and electronics production wastes.
DI (2-ETHYLHEXYL) PHTHALATE5/16/2016WBR PUBLIC UTILITIES3.60.64 - 3.6ppb60Discharge from rubber and chemical factories
FLUORIDE5/16/2016WBR PUBLIC UTILITIES0.280.2 - 0.28ppb44Erosion of natural deposits; Water additive which promotes strong teeth; Discharge from fertilizer and aluminum factories.

RadionuclidesCollection DateHighest ValueRangeUnitMCLMCLGTypical Source
No Detected Results were Found in the Calendar Year of 2016

Lead and CopperDate90TH PercentileRangeUnitALSites Over ALTypical Source
COPPER, FREE2013 – 20150.10.1 – 0.2ppm1.30Corrosion of household plumbing systems; Erosion of natural deposits; Leaching from wood preservatives
LEAD2013 – 201511ppb150Corrosion of household plumbing systems; Erosion of natural deposits

Disinfection ByproductsSample PointPeriodHighest LRAARangeUnitMCLMCLGTypical Source
TOTAL HALOACETIC (HAA5) ACIDS5131 REBELLE LANE201633.1 - 3.1ppb600By-product of drinking water disinfection
TOTAL HALOACETIC (HAA5) ACIDS553 LOBDELL201610.88 - 0.88ppb600By-product of drinking water disinfection
TTHM5131 REBELLE LANE20161615.5 - 15.5ppb800By-product of drinking water chlorination
TTHM553 LOBDELL201665.8 - 5.8ppb800By-product of drinking water chlorination

Secondary ContaminantsCollection DateWater SystemHighest ValueRangeUnitSMCL
ALUMINUM6/8/2016WBR PUBLIC UTILITIES0.030.03MG/L0.05
CHLORIDE5/16/2016WBR PUBLIC UTILITIES7.63.7 - 7.6MG/L250
IRON6/8/2016WBR PUBLIC UTILITIES0.410.03 - 0.41MG/L0.3
MANGANESE6/8/2016WBR PUBLIC UTILITIES0.050.01 - 0.05MG/L0.05
PH5/16/2016WBR PUBLIC UTILITIES8.76.09 - 8.7PH8.5
SULFATE6/8/2016WBR PUBLIC UTILITIES128.8 - 12MG/L250


DisinfectantDateHighest RAAUnitRangeMRDLMRDLGTypical Source
CHLORINE20161.16ppm0.64 - 1.844Water additive used to control microbes


 

++++++Environmental Protection Agency Required Health Effects Language++++++

Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infections. These people should seek advice about drinking water from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Drinking Water Hotline (800–426–4791).

There are no additional required health effects notices.

There are no additional required health effects violation notices.


Thank you for allowing us to continue providing your family with clean, quality water this year. In order to maintain a safe and dependable water supply we sometimes need to make improvements that will benefit all of our customers.

We at the WBR DISTRICT 4 - HOLIDAY INN work around the clock to provide top quality drinking water to every tap. We ask that all our customers help us protect and conserve our water sources, which are the heart of our community, our way of life, and our children's future. Please call our office if you have questions.



CCR Report for WBR District 4 Section Road Winterville Public Water Supply ID: LA1121027

Download Report: CCR Report for WBR District 4 Section Road Winterville Public Water Supply ID: LA1121027

The Water We Drink

WBR District 4 Section Road Winterville

Public Water Supply ID: LA1121027

We are pleased to present to you the Annual Water Quality Report for the year 2016. This report is designed to inform you about the quality of your water and services we deliver to you every day (Este informe contiene información muy importante sobre su agua potable. Tradúzcalo o hable con alguien que lo entienda bien). Our constant goal is to provide you with a safe and dependable supply of drinking water. We want you to understand the efforts we make to continually improve the water treatment process and protect our water resources. We are committed to ensuring the quality of your water.

Our water source(s) are listed below:

Source NameSource Water Type
WBR DIST #4 WELL #1 - 9960 SECTION ROADGround Water
WBR DIST #4 WELL #2 - 12450 SECTION ROADGround Water
WBR DIST #4 WINTERVILLE WELLGround Water

The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of land or through the ground, it dissolves naturally-occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity. Contaminants that may be present in source water include:

Microbial Contaminants - such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife.

Inorganic Contaminants - such as salts and metals, which can be naturally-occurring or result from urban stormwater runoff, industrial, or domestic wastewater discharges, oil and gas production, mining, or farming.

Pesticides and Herbicides - which may come from a variety of sources such as agriculture, urban stormwater runoff, and residential uses.

Organic Chemical Contaminants – including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban stormwater runoff, and septic systems.

Radioactive Contaminants – which can be naturally-occurring or be the result of oil and gas production and mining activities.

A Source Water Assessment Plan (SWAP) is now available from our office. This plan is an assessment of a delineated area around our listed sources through which contaminants, if present, could migrate and reach our source water. It also includes an inventory of potential sources of contamination within the delineated area, and a determination of the water supply's susceptibility to contamination by the identified potential sources. According to the Source Water Assessment Plan, our water system had a susceptibility rating of 'MEDIUM'. If you would like to review the Source Water Assessment Plan, please feel free to contact our office.

In order to ensure that tap water is safe to drink, EPA prescribes regulations which limit the amount of certain contaminants in water provided by public water systems. Food and Drug Administration regulations establish limits for contaminants in bottled water which must provide the same protection for public health. We want our valued customers to be informed about their water utility. If you have any questions about this report, want to attend any scheduled meetings, or simply want to learn more about your drinking water, please contact DARYL BABIN at 225-336-2406.

If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. WBR DISTRICT 4 -SECTION ROAD WINTERVILLE is responsible for providing high quality drinking water, but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at http://www.epa.gov/safewater/lead.

The Louisiana Department of Health and Hospitals - Office of Public Health routinely monitors for constituents in your drinking water according to Federal and State laws. The tables that follow show the results of our monitoring during the period of January 1st to December 31st, 2016. Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk.

In the tables below, you will find many terms and abbreviations you might not be familiar with. To help you better understand these terms, we’ve provided the following definitions:

Parts per million (ppm) or Milligrams per liter (mg/L)– one part per million corresponds to one minute in two years or a single penny in $10,000.

Parts per billion (ppb) or Micrograms per liter (ug/L)– one part per billion corresponds to one minute in 2,000 years, or a single penny in $10,000,000.

Picocuries per liter (pCi/L) – picocuries per liter is a measure of the radioactivity in water.

Nephelometric Turbidity Unit (NTU) – nephelometric turbidity unit is a measure of the clarity of water. Turbidity in excess of 5 NTU is just noticeable to the average person.

Action level (AL) – the concentration of a contaminant that, if exceeded, triggers treatment or other requirements that a water system must follow.

Maximum contaminant level (MCL) – the "Maximum Allowed” MCL is the highest level of a contaminant that is allowed in drinking water. MCL’s are set as close to the MCLG’s as feasible using the best available treatment technology.

Maximum contaminant level goal (MCLG) – the "Goal” is the level of a contaminant in drinking water below which there is no known or expected risk to human health. MCLG’s allow for a margin of safety.

Maximum residual disinfectant level (MRDL) – The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

Maximum residual disinfectant level goal (MRDLG) – The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.

During the period covered by this report we had the below noted violations.

Compliance PeriodAnalyteType
No Violations Occurred in the Calendar Year of 2016

Our water system tested a minimum of 6 samples per month in accordance with the Total Coliform Rule for microbiological contaminants. During the monitoring period covered by this report, we had the following noted detections for microbiological contaminants:

MicrobiologicalResultMCLMCLGTypical Source
COLIFORM (TCR)In the month of July, 1 sample(s) returned as positiveMCL: Systems that Collect Less Than 40 Samples per Month - No more than 1 positive monthly sample0Naturally present in the environment

In the tables below, we have shown the regulated contaminants that were detected. Chemical Sampling of our drinking water may not be required on an annual basis; therefore, information provided in this table refers back to the latest year of chemical sampling results.

Regulated ContaminantsCollection DateHighest ValueRangeUnitMCLMCLGTypical Source
ARSENIC 4/20/20161.11.1 ppb10 0 Erosion of natural deposits; Runoff from orchards; Runoff from glass and electronics production wastes
BARIUM4/20/20160.015 0.0083 - 0.015ppm22Discharge of drilling wastes; Discharge from metal refineries; Erosion of natural deposits
FLUORIDE 4/20/20160.30.25 - 0.3ppm 44Erosion of natural deposits; Water additive which promotes strong teeth; Discharge from fertilizer and aluminum factories

RadionuclidesCollection DateHighest ValueRangeUnitMCLMCLGTypical Source
No Detected Results were Found in the Calendar Year of 2016

Lead and CopperDate90TH PercentileRangeUnitALSites Over ALTypical Source
COPPER, FREE2012 - 20140.10.1 - 0.3ppm1.30Corrosion of household plumbing systems; Erosion of natural deposits; Leaching from wood preservatives
LEAD 2012 - 201481 - 19ppb152Corrosion of household plumbing systems; Erosion of natural deposits

Disinfection ByproductsSample PointPeriodHighest LRAARangeUnitMCLMCLGTypical Source
TOTAL HALOACETIC (HAA5) ACIDS13921 ROSEDALE ROAD201654.7 - 4.7ppb600By-product of drinking water disinfection
TOTAL HALOACETIC (HAA5) ACIDS8236 ROSEHILL DR - SECTION RD201643.5 - 3.5ppb600By-product of drinking water disinfection
TTHM13921 ROSEDALE ROAD20162323 - 23ppb800By-product of drinking water chlorination
TTHM8236 ROSEHILL DR - SECTION RD20161615.6 - 15.6ppb800By-product of drinking water chlorination

Secondary ContaminantsCollection DateHighest ValueRangeUnitSMCL
ALUMINUM3/19/20130.010.01MG/L0.05
CHLORIDE4/20/201653.3 - 5MG/L250
IRON4/20/20160.0270.027MG/L0.03
MANGANESE4/20/20160.0130.0033 - 0.013MG/L0.05
PH4/20/20169.28.6 - 9.2PH8.5
SULFATE3/19/201388MG/L250


DisinfectantDateHighest RAAUnitRangeMRDLMRDLGTypical Source
CHLORINE20162.94ppm0.63 - 12144Water additive used to control microbes


 

++++++Environmental Protection Agency Required Health Effects Language++++++

Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infections. These people should seek advice about drinking water from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Drinking Water Hotline (800–426–4791).

Additional Required Health Effects Language:

95th Percentile Health Effects Language

Infants and children are typically more vulnerable to lead in drinking water than the general population. It is possible that lead levels at your home may be higher than at other homes in the community as a result of materials used in your home's plumbing. If you are concerned about elevated lead levels in your home's water, you may wish to have your water tested and flush your tap for 30 seconds to 2 minutes before using tap water. Additional information is available from the Safe Drinking Water Hotline (800-426-4761).

There are no additional required health effects violation notices.


Thank you for allowing us to continue providing your family with clean, quality water this year. In order to maintain a safe and dependable water supply we sometimes need to make improvements that will benefit all of our customers.

We at the WBR DISTRICT 4 -SECTION ROAD WINTERVILLE work around the clock to provide top quality drinking water to every tap. We ask that all our customers help us protect and conserve our water sources, which are the heart of our community, our way of life, and our children's future. Please call our office at (225) 336-2406 if you have questions.

  
WBR Public UtilitiesPublic Water Supply ID: LA1121008
West Baton Rouge Water Works District 2Public Water Supply ID: LA1121018
WBR Public Utility District #4 ArbrothPublic Water Supply ID: LA1121026
WBR Public Utility District #4 Holiday InnPublic Water Supply ID: LA1121024
WBR Public Utility District #4 Section Road WintervillePublic Water Supply ID: LA1121027



 

© Copyright 2017, West Baton Rouge Parish Council. All rights reserved.